Seiko 4R35 Specifiche Pagina 18

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 19
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 17
69
Specications
Accuracy of Mechanical Watches
The accuracy of mechanical watches is indicated by the "daily rate."
The accuracy of mechanical watches may not fall within the specied
range of time accuracy because loss/gain changes due to the position
of the watch, which is dependent on the conditions of use, such as
the length of time during which the watch is worn on the wrist, arm
movement, and whether the mainspring is wound up fully or not, etc.
The loss/gain of mechanical watches is not measured by a daily
rate, but by daily rates of one week or so.
Accuracy variation according to temperature
 ・
Thepartsthatcomposetheaccuracyofmechanicalwatchesaremade
ofmetals. It iswellknown that metals expandorcontract depending
ontemperaturesduetometalproperties.Thisexertsane󰮏ectonthe
accuracyofthewatches.Mechanicalwatchestendtolosetimeathigh
temperatureswhiletheytendtogaintimeatlowtemperatures.
68
Troubleshooting
Problem Possible cause Solution
The watch stops
operating.
The watch is not wound up
su󰮐ciently.
Turn the crown or swing the watch to wind it up.
The watch will start operating. If the watch not,
consult the retailer from whom the watch was
purchased.
The watch gains/
loses temporarily.
The watch has been left in extremely
high or low temperatures for a long time.
The normal accuracy will resume when the
watch returns to normal temperature.
The watch was brought into
close contact with a magnetic
object.
The normal accuracy will resume when the watch is
kept away from close contact with the magnetic source.
If this condition persists, consult the retailer from whom
the watch was purchased.
You dropped the watch, hit it against
a hard surface or wore it while playing
active sports.
The watch was exposed to strong
vibrations.
The normal accuracy will not resume. Consult
the retailer from whom the watch was purchased.
The watch has not been overhauled
for more than 3 years.
Consult the retailer from whom the watch was
purchased.
The date changes at
12 o'clock noon.
AM/PM is not properly set. Advance the hands by 12 hours.
The glass is blurred and the
blur persists for a long time.
Water got inside the watch due to
the deterioration of the gasket, etc.
Consult the retailer from whom the watch was
purchased.
For the solution of troubles other than listed above, contact the retailer from whom the watch was purchased.
TROUBLESHOOTING
67
Topreservethequalityofyourwatch
Inspection and adjustment by disassembly and cleaning (overhaul)
Periodic inspection and adjustment by disassembly and cleaning (overhaul) is recommended
approximatelyonceevery2to3yearsinordertomaintainoptimalperformanceofthewatchforalong
time.Thepowertransmissiongearofthemovementofthiswatchconstantlyreceivesforce.Toensure
that thismechanism works properly all thetime,washing parts, changing oil, adjustingaccuracy,
checkingfunctionsandreplacingconsumablepartsonaregularbasisareimportant.Therstoverhaul
afterthe purchaseofyour watchis particularlyimportantfor preservinglong-time useofyour watch.
Accordingtouseconditions,theoilretainingconditionofyourwatchmechanicalpartsmaydeteriorate,
abrasionof theparts dueto contaminationofoil mayadvance ordelay thetime signicantly,or the
watchitself may stop.As theparts such asgasket may deteriorate,water-resistant performance
maybeimpairedduetointrusionofperspirationandmoisture.Pleasecontacttheretailerfromwhom
the watchwaspurchased for inspection and adjustment bydisassemblyand cleaning (overhaul).
Forreplacement ofparts,please specify"SEIKO GENUINEPARTS."Whenasking forinspection and
adjustmentbydisassemblyandcleaning(overhaul),makesurethatthegasketandpushpinarealso
replacedwithnewones.
66
Topreservethequalityofyourwatch
After-sale service
Notes on guarantee and repair
・Contactthe retailerthewatchwaspurchased fromor SEIKOCUSTOMER SERVICE
CENTERforrepairoroverhaul.
・Withinthe guarantee period,present the certicateof guaranteeto receive repair
services.
・Guaranteecoverage isprovided in thecerticate of guarantee.Read carefullyand
retainit.
・Forrepair services after the guaranteeperiodhas expired, if the functionsof the
watchcanberestoredbyrepairwork,wewillundertakerepairservicesuponrequest
andpayment.
Repair parts
・Therepairpartsofthiswatchwillberetainedusuallyfor7years.
・Somealternativepartsmaybeusedforrepairifnecessary.
Vedere la pagina 17
1 2 ... 13 14 15 16 17 18 19

Commenti su questo manuale

Nessun commento