Seiko TM-T90 Manuale Scaricare il pdf (Pagina 7)

Version 2.61 Feb. 2008

APPLICATION DEVELOPMENT GUIDE

POSPrinter (TM-T90)

Make other settings in accordance with the settings described above.

4) Ethernet Port

DIP-SW1 DIP-SW2

No. Setting No. Setting

1 OFF Settable 1 OFF Fixed at OFF

2 OFF Fixed at OFF

3 OFF Fixed at OFF

4 OFF Fixed at OFF

5 OFF Fixed at OFF

6 OFF Fixed at OFF

7 OFF Fixed at OFF

8 OFF Fixed at OFF

Set DIP-SW1-1 (Power button function).

If this DIP Switch is ON, the power button is disabled.

Do not change the current settings of DIP-SW2-1.

Make other settings in accordance with the settings described above.

2.3 Port Information

1) Port information when serial port is used

The port information that can be set with the SetupPOS utility is as follows.

Item Setting range

Baud rate [bps] 2400,4800,9600,19200,38400

57600

,115200

Bit length [bit] 8

Parity NONE, ODD, EVEN

Stop bit [bit] 1

Handshake DTR/DSR

Output buffer length [byte] 32 to 1024

Output interval time [ms] 0 to 9999

These Baud rate require setting via Memory Switch.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Nessun commento

Seiko TM-T90 Manuale Pagina 7