
Using the Projector on a Network 93
3. Choose Others, then press Enter. You see the following screen:
4. Turn on the SNMP setting.
5. Enter up to two IP addresses for notification.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used: 127.x.x.x,
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to
255).
6. For
Priority Gateway, select Wired or Wireless.
7. If your network environment uses an AMX controller, select
ON
to allow the projector to be detected by AMX Device Discovery.
Commenti su questo manuale